Sony Accessories

Sony Cable for MDR-MV1

SON-100178521

Not in stock

Show

SPARE PART

Sony Pad Assy Ear MDR-7506

SON-2-115-668-03

Headphone Earpads for Sony MDR-7506. Price per unit.

In stock

Show

Sony AD-C77 wind screen selection

SON-AD-C77

- Designed for ECM-77 Series lavalier microphones
- Two sets of the six colors (red, yellow, green, blue, gray, and black) are included

Not in stock

Show

Sony AD-C77B wind screens, black

SON-AD-C77B

12x wind screen for Sony ECM-77, black

Not in stock

Show

Sony AD-C88 wind screen selection

SON-AD-C88

- Designed for ECM-88 Series lavalier microphones
- Two sets of the six colours (red, yellow, green, blue, gray, and black) are included.

Not in stock

Show

Sony AD-KIT77 accessories kit for ECM-77

SON-AD-KIT77

The AD-KIT77B is a lavalier microphone accessory kit for the ECM-77 Series.

- Designed for ECM-77 Series lavalier microphones
- Includes four types of microphone holders (horizontal/single type, vertical/single type, horizontal/dual type, and safety-pin type), six urethane windscreens (red, yellow, green, blue, gray, and black), and a metal-mesh windscreen.

Not in stock

Show

Sony AD-KIT88B accessories kit for ECM-88

SON-AD-KIT88B

The AD-KIT88B is a lavalier microphone accessory kit for the ECM-88 Series.

- Designed for ECM-88 Series lavalier microphones
- Includes four types of microphone clips (single/horizontal, single/vertical, double/horizontal, and safety-pin type tie clip) and six urethane windscreens (red, yellow, green, blue, gray, and black)

Not in stock

Show

Sony AD-R44B wind screens, Black

SON-AD-R44B

Windscreen Pack for ECM-44B Black 12 pcs.

Not in stock

Show

Sony AD-R66B 12 x windscreen for ECM-66B

SON-AD-R66B

- Designed for ECM-66 Series lavalier microphones
- Black colour
- 12 pieces are included.

Not in stock

Show

Sony AD-R77B wind screens, Black

SON-AD-R77B

- Designed for ECM-77 Series lavalier microphones
- Black colour
- Six pieces are included

Not in stock

Show

Sony AD-R88B wind screens, black

SON-AD-R88B

12x wind screen for ECM-88B - black urethane

Not in stock

Show

Sony AD-RV1B2//K wind screens for ECM-V1BMP

SON-AD-RV1B2//K

UWP Wind Screen (5 pieces) for ECM-V1BMP

* Designed for ECM-V1BMP lavalier microphone
* Black colour

In stock

Show

Sony AD-RX7B wind screens for ECM-X7BMP

SON-AD-RX7B

* Designed for ECM-X7BMP lavalier microphone
* Black colour
* 6 pieces are included.

In stock

Show

Sony BATC-4AA Battery case UTX-B40

SON-BATC-4AA

The BATC-4AA allows quick, convenient battery exchange when using the UTX-B40 bodypack transmitter and URX-P40 portable receiver. The battery case holds two standard AA-size cells.

In stock

Show

NEW

Sony BC-DWZ1//EU Battery charger

SON-BC-DWZ1//EU

Recharges AA NiMH-type batteries operating with the ZTX-M02RC digital wireless handheld transmitter and ZTX-B02RC digital wireless body-pack transmitter

The BC-DWZ1 is a contactless recharger, this means you simply place the transmitter into the charging station to recharge NiMH-type batteries. You do not need to physically remove the batteries to recharge them, which saves you time and reduces wear and tear to the transmitters.

Not in stock

Show

Sony BLC-BP2 UWP bodypack clip

SON-BLC-BP2

* Belt Clip for UTX-B2, Bodypack Transmitter and URX-P2, Portable Tuner
* 2 pieces are included.

Not in stock

Show

Sony DC-78 battery power unit

SON-DC-78

The DC-78 is a compact and in-line power supply for the Sony lavalier microphone range. It can be used to configure the popular ECM-44/77BC and ECM-88 for use as wired microphones.

- Designed for use with Sony lavalier microphones equipped with a Sony 4-pin (SMC9-4P) connector
- Two-way powering: battery operation (using an AA-size (LR6) alkaline battery) or external DC operation (12 to 48 V)
- Supplied with an SMC9-4S input connector and an XLR 3-pin output connector

Flexibility

The DC-78 allows 'wireless ready' Sony ECM microphones (such as ECM-44BC, 77BC and 88) to be converted for use as wired microphones. The DC-78 is a compact in-line unit, with a 4-pin socket for the ECM microphone, a AA battery compartment and an XLR output connector. The DC-78 provides the flexibility of additional working methods, for example the microphone can be easily switched between a wireless and wired modes.

Versatilite powering options

The DC-78 allows Sony ECM microphones to powered for wired use, either by the internal AA battery or an external 48volt phantom powering.

Not in stock

Show

Sony EC-0.46BX microphone cable

SON-EC-0.46BX

The EC-0.46BX 3-pole Locking Mini-Plug to XLR Cable (Male) from Sony is ideal for use with your UWP-D Series

Not in stock

Show

Sony EC-0.5X3F5M microphone cable

SON-EC-0.5X3F5M

Microphone Cable 3-Pol XLR female to 5-Pol XLR male

The Shotgun Mic Cable is intended to connect Sony ECM series microphones with 3-pin XLR outputs (such as the ECM-674), into the 5-pin XLR inputs on the front of video cameras. A mono microphone signal is fed into both channels of the camera.

• Used to connect Sony ECM series mono shotgun mics with front of camera 5-pin stereo mic inputs
• Connects a mono shotgun mic to both channels of the camcorder's stereo mic input

Not in stock

Show

Sony EC-0.5X5F3M microphone cable

SON-EC-0.5X5F3M

Microphone Cable 5-Pol XLR female to 2x 3-Pol XLR male

This 5-Pin to Dual 3-pin XLR Cable is used to connect the Sony ECM-680S stereo shotgun microphone into the dual XLR inputs on camcorders. The cable measures 16" (40.64cm) in length and features a 5-pin XLR input on the single end, and dual XLR male outputs.

• 5-pin female XLR on one end - two 3-pin male XLR's on the other end

Not in stock

Show

Sony EC-0.8BM microphone cable

SON-EC-0.8BM

* 3.5 mm dia. (5/32 inch dia.), 3-pole mini phone plug with a lock mechanism to stereo mini-plug
* Allows a equipment with a stereo mini input connector to be connected to the URX-P2 Portable tuner
* Cable length: 0.88 m (2.9 feet)

In stock

Show

Sony EC-1.5BX microphone cable

SON-EC-1.5BX

* 3.5 mm dia. (5/32 inch dia.), 3-pole mini phone plug with a lock mechanism to 3-pin male XLR type connector
* Allows a equipment with a 3-pin male XLR output connector to be connected to the UTX-B2 bodypack transmitter
* Cable length: 1.5 m (4.9 feet)

In stock

Show

Sony GC-0.7BMP guitar cable

SON-GC-0.7BMP

Guitar cable for use with DWZ Series digital wireless body-pack transmitter. It is supplied with the DWZ-B30GB and DWZ-B50GB digital wireless sets for guitar and bass.

28-inch length, ¼-inch male phone to 1/8-inch locking mini

Not in stock

Show

Sony GC-0.7CP/R guitar cable

SON-GC-0.7CP/R

Sony GC-0.7CP/R - Sony Guitar Cable - right angle plug for Sony DWX systems.

Not in stock

Show

Sony GC-0.7CP/S guitar cable

SON-GC-0.7CP/S

GUITAR CABLE STRAIGHT PLUG FOR SONY DWX

Not in stock

Show

Sony LCS-URXP3//K soft case

SON-LCS-URXP3//K

The LCS-URXP3 is a soft case for the URX-P03 wireless portable receiver. It provides a Velcro mounting capability.

Not in stock

Show

Sony SAD-H77B single clip pack (10 pcs.)

SON-SAD-H77B

- Single/horizontal holder clip for the ECM-77 Series lavalier microphones
- Black colour
- 10 pieces are included.

In stock

Show

Sony SAD-H88B clip pack (6 pcs.)

SON-SAD-H88B

The SAD-H88B is a horizontal type lavalier microphone holder clip for the ECM-88 Series.

- Single/horizontal holder clip for the ECM-88 Series lavalier microphones
- Black colour
- Six pieces are included.

Not in stock

Show

Sony SAD-HV1B UWP series lavalier mic clips (4 pcs.)

SON-SAD-HV1B

* Single/horizontal holder clip for the UWP lavalier microphones
* Black colour
* 4 pieces are included.

Not in stock

Show

Sony SAD-HV1B2//K UWP lavalier mic clip (4 pcs.)

SON-SAD-HV1B2//K

Sony UWP Lavalier Microphone Clips (x4) for ECM-V1BMP Microphone

Not in stock

Show

Sony SAD-HZ1B//K single clip pack (4 pcs.)

SON-SAD-HZ1B//K

For use with the Sony ECM-LZ1UBMP digital wireless uni-directional electret condenser lavalier microphone

The SAD-HZ1B is supplied with the DWZ-B70HL digital wireless microphone set for vocal/speech.

Black, 4 pieces in each package.

Not in stock

Show

Sony SAD-M01//K mic holder

SON-SAD-M01//K

An original shock-mount mechanism which improves sound quality by preventing unwanted vibration.
The SAD-M01 is supplied with the DWZ-M50, DWZ-M70, ZTX-M01, ZTX-M02RC, UWP-D12, UWP-D16 or UTX-M03

In stock

Show

Sony SAD-V88B clip pack (6 pcs.)

SON-SAD-V88B

The SAD-V88B is a vertical type lavalier microphone holder clip for the ECM-88 Series.

- Single/vertical holder clip for the ECM-88 Series lavalier microphones
- Black colour
- Six pieces are included.

Not in stock

Show

Sony SAD-W77B double clip pack (6 pcs.)

SON-SAD-W77B

Double/vertical holder clip for the ECM-77 Series lavalier microphones
Black colour
Six pieces are included per pack.

Not in stock

Show

Sony SMAD-P3D 2 channel MI Shoe adapter

SON-SMAD-P3D

Sony SMAD-P3D Dual channel Multi Interface Shoe (MI Shoe) adaptor for cable-free connection

The 2-channel wireless receiver URX-P03D can be attached to camcorders or interchangeable-lens cameras that have an MI (Multi-Interface) shoe using the 2-channel MI shoe adaptor SMAD-P3D. This eliminates the need for connecting cables. By using the MI shoe adaptor, audio signals can be transmitted from the wireless receiver to a camera. In addition, the wireless receiver can get power from the camera, and the camera can control power ON/OFF, unifying power management.

The SMAD-P3D is applicable to XDCAM Camcorder PXW-X70, PXW-X160, PXW-X180, PXW-X280, PXW-X200*, PXW-Z150**, PXW-FS7, PXW-FS5 and PXW-FS5K, NXCAM Camcorder HXR-NX100, HXR-MC2500, Handycam FDR-AX100 ***, NEX-VG900* ***, & NEX-VG30 ***, plus interchangeable lens digital camera a7* ***, a7R ***, a7S ***, a7 Mark? ***, a7R Mark? ***, a7S Mark? ***, a99 ***, a6000***, a6300 ***, and Cyber-shot DSC-RX10 ***, (as of April 2016).

* PXW-X200 firmware should be upgraded to Ver.2.00 or later for using SMAD-P3D.

** When using with PMW-Z150 operated by AC power, please set a battery on the camera. Without a battery, the power supply function and power ON/OFF control function will not be available. In that case, insert new AA alkaline batteries in the receiver and set the receiver’s power select (PWR SOURCE) menu item to BATT ONLY mode to avoid an unexpected shutdown of the camera or data loss.

*** When using with these specific camera models, the power supply function and power ON/OFF control function will not be available. Insert new AA alkaline batteries in the receiver and set the receiver’s power select (PWR SOURCE) menu item to BATT ONLY mode to avoid unexpected shutdown of the camera or data loss.

No need for separate XLR cable

Using an MI Shoe connection, the 2-channel audio signal from wireless receiver URX-P03D can be input to the camera without XLR cables.

Power can be supplied by camera

Power can be switched on and off from the camera/camcorder.

In stock

Show

Sony SMAD-P4 MI shoe adapter

SON-SMAD-P4

Shoe Mount Adaptor for URX-P40 (1-ch reciever).
The SMAD-P4 Shoe Mount Adaptor allows convenient connection of the URX-P40 wireless receiver to compatible camcorders or interchangeable-lens cameras

In stock

Show

Sony SMAD-P5 MI shoe adapter (NEW)

SON-SMAD-P5

The SMAD-P5 Multi Interface (MI) Shoe Adaptor allows convenient, cable-free connection of the URX-P40 wireless receiver to compatible camcorders or interchangeable-lens cameras featuring an MI (Multi Interface) shoe. Audio signals are transmitted directly from the wireless receiver to the camera with no need for connecting cables. The adaptor also supports direct digital audio recording with compatible camcorders, bypassing A/D and D/A conversion stages to deliver high sound quality with low noise. The SMAD-P5 allows the wireless receiver to draw power from the camcorder via the MI shoe, while receiver power ON/OFF can be controlled directly from the camera.

The SMAD-P5 is applicable to XDCAM Camcorder PXW-FX9, PXW-FS7, PXW-FS7II, PXW-FS5, PXW-FS5K, PXW-Z280/Z190, PXW-X280/X200*, PXW-X180/X160, PXW-Z150**, PXW-Z90 and PXW-X70, NXCAM Camcorder HXR-NX5R, HXR-NX80, HXR-MC2500 and HXR-MC88, Handycam FDR-AX60 and NEX-VG30E, interchangeable lens digital camera α7II, α7III, α7RII, α7RIII, α7RIV, α7S, α7SII, α9 and α99II with analog output setting. Digital connection is available with PXW-FX9, PXW-Z280/Z190 and α7RIV. PXW-FX9 and PXW-Z280/Z190 can show the wireless microphone status on the LCD or viewfinder. (as of September 2019)

*PXW-X200 firmware should be upgraded to Ver.2.00 or later for using SMAD-P5.

**When using with PXW-Z150 operated by AC power, please set a battery on the camera. Without a battery, we do not guarantee the power supply function or power ON/OFF control function. In that case, insert new AA alkaline batteries in the receiver and set the receiver’s power select (PWR SOURCE) menu item to BATT ONLY mode to avoid an unexpected shutdown of the camera or data loss.

Not in stock

Show