K-GEAR

Active PA column system with 8” powered subwoofer and with 3 modular column elements featuring 4x2,5” PAT® K-array™ technology array. Designed for discrete outdoor/indoor applications both for rental and permanent installations for musicians, dj’s in small venues, conference rooms.

It features 2 mic/line input, a stero AUX input, Bluetooth connectivity, USB mp3 player.

High performance to size/weight ratio featuring easy and fast setup possibility.

GENERAL

Power: 200W

Impedance: 4Ω+4Ω

Frequency Range: 45Hz – 20KHz

Maximum SPL(1): 108dB (peak)

Continuos SPL: 95dB

Coverage: V.40° - H.100°

TRANSDUCERS

Subwoofer: 8” ferrite magnet

Mid High Frequency: 4 x 2.5” ferrite magnet

AUDIO I/O

Analog balanced I: 2 x XLR female mic/line - 6.3mm jack mono mic/line

Analog unbalanced I: 3.5mm jack stereo

USB: USB 2.0 A

SD slot: SD card

Bluetooth: 4.2 bluetooth with TWS technology to pair two GP8A for stereo listening

Analog balanced O: XLR male

AUDIO CONTROLS

Master level control - Analog unbalanced input level control - Analog balanced

input level control - Mic input effect control - Subwoofer level control - Mp3 player

controls for use with BT, USB pen drive or SD card

AMPLIFIER

Type: 2-channel Class-D audio amplifier

Power 2 x 100W @4ohm

AC input: 50-60Hz 100-240V

Max power consumption: 70W (peak)

Protections: Output short protection, DC Offset, Over Temperature, Under Voltage

Over Voltage

PHYSICAL OVERVIEW

Width: 315mm (12,40in)

Height: 910-1857mm (35,82 -73,11in)

Depth: 405mm (15,95in)

Weight: 12,5-14,5kg (27,56-31,97lbs)

Material: ABS

Rating: IP41 (sub) - IP54 (sat)

NOTE: (1) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m

GP8A-BAGS
Carry Bag + Cover Set for GP8A W/ KGEAR Logo - Black Color

GP12A is a portable high-performance Sub + Column system that delivers impressive sound in a compact package. The system features a 12” subwoofer with a ferrite magnet and a modular column with 16x2” drivers with neodymium magnets.

The active version has a built-in 4x750W RMS Class-D amplifier and can drive up to 3 full GP12 passive systems simultaneously. The column drivers feature an alternating angle pattern that increases dispersion up to 140° on the horizontal plane, providing an immersive sound field with long throw and narrow vertical dispersion. GP12A also comes with 4 factory presets to adapt to any need.

Thanks to its quick setup and compact design, GP12A/GP12 is an ideal solution for small and medium temporary and fixed applications where performance to size ratio is critical. The system is perfect for events of any kind, small stages, trade shows, broadcast, and corporate settings.

User Tip: optimize the cost and combine the system with the passive model, whether for stereo configurations or distributed sound.

Specifications

General

Type: 12” Subwoofer + 16x2” Modular Column System (Active)

Transducers: SUB: 12” / TOP: 2 modules with 8x2” neodymium magnet drivers

Frequency Response: 45 Hz - 20 kHz (-6dB)

Max SPL: 123 dB

Rated Power: SUB: 1200W | TOP: 700W

Coverage: V. 25° | H. 140°

Connectors: 2x Combo jack-XLR female, 1x RJ45, 2x SpeakON to drive up to 3 GP12 Passive Systems in a stereo configuration

Controllers: Volume potentiometer, RJ45 connector, DSP can be remotely controlled via an Ethernet connection through Powersoft ArmoniaPlus Software

Amp Module: 4-channel Class-D audio amplifier

Output Power: 4x750W RMS @4Ω

Power Consumption: 375W Rated Load (¼ Max Power @8ohm)

Protections: Thermal Protections (Power limiting - Thermal Shutdown), Short-circuit/overload output protections, stationary high frequency protection, peak limiter, RMS limiter, frequency dependent RMS limiter, Clip limiter”

Operating Range: 100-240V AC, 50-60 Hz

Nominal Impedance: SUB: 4Ω / TOP: 16 Ω

Handling and finishes

Dimensions (W x H x D): 405x2080x430 mm

Weight: 20kg

Material: SUB: Birch plywood / TOP: ABS

Colors: Black

IP Rating: SUB: IP41, TOP: IP54

GP12 is a portable high-performance passive Sub + Column system that includes a 12” subwoofer with a ferrite magnet and a modular column with 16x2” drivers with neodymium magnets. The column drivers feature an alternating angle pattern that increases the dispersion up to 140° on the horizontal plane to provide a very immersive sound field while ensuring a long throw and a narrow vertical dispersion.

GP12 can be easily driven by an active GP12A in stereo or dual stereo setup, or by our GA43 amplifier, making it a flexible solution for various sound system configurations. Thanks to the quick setup and compact design, GP12A/GP12 are highly effective for small and medium temporary and fixed applications where the performance-to-size ratio is key, such as events of any kind, small stages, trade shows, broadcast, and corporate functions.

User Tip: Optimize cost and enhance the sound coverage by combining GP12A active system with the passive model for stereo or dual stereo configurations.

Specifications

General

Type: 12” Subwoofer + 16x2” Modular Column System (Active)

Transducers: SUB: 12” / TOP: 2 modules with 8x2” neodymium magnet drivers

Frequency Response: 45 Hz - 20 kHz (-6dB)

Max SPL: 123 dB

Rated Power: SUB: 1200W, TOP: 700W

Coverage: V. 25°, H. 140°

Connectors: 2x Speakon NL4

Nominal Impedance: SUB: 4Ω / TOP: 16 Ω (each column module)

Handling and finishes

Dimensions (W x H x D): 405x2080x430 mm

Weight: 19kg

Material: SUB: Birch plywood / TOP: ABS

Colors: Black

IP Rating: SUB: IP43, TOP: IP54

Carry Hardcase for Column Set GP18/A GP12/A ABS - Black Color W/ KGEAR Logo